Hi-Hog Heavy Duty Gates

---

Width from 4' to 20'

The heavy duty 5 and 6 bar gates are designed for heavy use.  These gates are primarily used in livestock handling applications.

Heavy duty gates are constructed of 1.9" OD 14 gauge tubing throughout.  The end verticals are coned to remove sharp edges.  The horizontals are reinforced with 1 1/2" OD 16 gauge tubing.  Each of the vertical supports is coped to fit the horizontals.

Each gate comes with two 13" x 1" All-thread hinges on four inch collars.  The hinges are secured to the gate for shipping with a self-drill screw.  Each gate includes 48" of 1/4" zinc plated chain and no-slip chain latch. 

Request Product Catalog

---

Additional Product Information

• 14-guage tubing throughout
  
• Gates are available in the following lengths: 4', 6', 8', 10', 12', 14', 16', 18', 20'
• Available in the 48" high and 59.25" high gates so that you can mount the top horizontal rail at the height  of 5' and 6' above the ground.
• The end verticals are coned to remove sharp edges

---

INQUIRY FORM

SIMILAR PRODUCTS

Hi-Hog Corral Gate

Hi-Hog Heavy Duty Panels