Hi-Hog Corral Gates

---

Widths from 4' to 20'

The corral gate is designed for moderate pressure uses such as corral applications. 

The top, bottom, and end verticals are constructed of 1.9" OD, 14 gauge tubing.  The interior horizontals are constructed of 1.5" OD, 16 gauge tubing.  The verticals are coned to remove sharp edges.  The horizontals are reinforced with 1.25" x 3/16" flat bar welded on alternating faces of the gate.

Each gate comes with two 13" x 1" All-thread hinges.  The hinges are secured to the gate for shipping with a self-drill screw.  Each gate includes 48" of 1/4" zinc plated chain and a no-slip chain latch. 

Request Product Catalog

---

Additional Product Information

• The top, bottom and the end verticals are constructed of 14 gauge tubing and the interior horizontals are constructed of 16 gauge tubing
  
• The verticals are coned to remove sharp edges
• The inside opening between each of the six horizontal bars is 7 3/8"
• Each gate comes with two 13" x 1" all thread hinges.The hinges are secured to the gate for shipping with a 1/4" head self-drill screw.  Each gate includes 48" of 1/4" zinc plated chain and a no-slip chain latch. 

---

INQUIRY FORM

SIMILAR PRODUCTS

Hi-Hog Heavy Duty Gates

Hi-Hog Corral Panels